How to distinguish between gantry machining center and vertical machining center?

Release time:

2023-12-11 08:52

1. The support structure is different:
Vertical machining center refers to the spindle axis and the table vertical setting of the machining center, vertical X, Y axis combined together, Z axis in the column to move up and down, suitable for mold and parts processing. The larger Lijia is about 4 meters long, and the model can be determined according to the specific objects processed.
The large gantry machining center refers to the machining center with the spindle axis perpendicular to the worktable. The Z-axis support structure of the gantry is different, and the Y-axis is horizontally placed between the two columns, which increases the load and processing range of the worktable.
2. Different uses:
Large gantry machining center is mainly suitable for processing large parts. Vertical machining center is mainly suitable for processing plate, disc, mold and small shell complex parts.
Large gantry machining center features:
1, environmental protection, because there will be no oil and mist spray, the surrounding environment is not polluted;
2. Oil supply. By increasing the control valve, the oil can be delivered to the main shaft and the screw and other lubrication points according to different needs;
3, there is no high viscosity lubricating oil atomization difficult problem; suitable for any oil;
4. Automatic detection and monitoring. It can detect whether the lubricating oil is normal, and if the lubrication is poor, it can alarm and stop to avoid abnormal operation of the equipment.
5. It is especially suitable for the rolling bearing of the main shaft, which has a certain air cooling effect, which can reduce the operating temperature of the bearing, thereby prolonging the service life of the main shaft;
6, small fuel consumption, cost savings.